U-Reach USB3.1 USB Drive 1 to 3 Portable Copier | U-Reach Data Solutions Inc. UK

U-Reach USB3.1 USB Drive 1 to 3 Portable Copier

U-Reach


SKU: USBA1
Lead time: 10 Business Days
Please ensure that your browser cookies are enable for adding products to cart.

Features

  • Read/Write speed inspection/Actual capacity inspection/ Bad sector inspection
  • Maximum copying speed of one single port can be up to 16GB/min (266 MB/sec).
  • In-built H2 and H5 Read/Write speed inspection, actual capacity inspection, and bad sector inspection
  • Supports bit-by-bit copy for all formats, including proprietary and unknown formats.
  • Compatible with USB 2.0/3.0/3.1.
  • Lightweight and portable design.

Impeccable High Speed
Highest speed USB Duplication /Inspection Equipment in the industry.  Maximum copying speed of one single port can be up to 16GB/min.

Intelligent Copy Option

  • Systems and Files (Quick Copy Mode)

1. The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process. 

2. This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to "whole media copy" mode.

  • Whole Media

1. The duplicator copies from the initial sector to the end, bit by bit.

2. There is no format limitation in this mode.

Quality Inspection

H2 Read/write speed inspection: In-built H2 read/write speed inspection test which is being widely used in the industry.

H5 Read/write speed inspection:the strictest quality inspection by writing into and reading the flash memory.

* Can set the area in the NAND flash to be inspected, read/write speed filtering, or bad sector inspection.

General

Model USBA1
Target 3

Specification
Maximum Transfer Speed 16GB/min. *Actual performance is dependent on device transfer speeds*
Capacity Supports the largest sized devices available on the market.
Operating Type Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages English, Japanese
LCD Display Backlit Monochrome LCD Display
LEDs  3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail)
Control Panel 4 Push Buttons(▲, ▼, OK, ESC)

Features
Copy Modes  Quick Copy (System & Files): Supports Windows, Mac, and Linux.
 Whole Media: Copies bit-by-bit regardless of format and data type.
Compare Function Bit-by-bit data comparison
Sanitization Modes Quick Erase, Full Erase, DoD Erase

Compatibilities
Compatible Devices USB1.1/2.0/3.0/3.1 devices and USB-HDDs
Compatible Devices (with required adapter) eUSB (USB DOM) 2.54mm and 2.00mm
Supported Formats Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux
(Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
Whole Device Copy Function: All Formats, including proprietary formats.
GPT, MBR, and Advanced Formats
Supported O/S All (Windows, Mac, Linux, and other stand-alone systems)

Hardware specification
Power Supply
Power Adapter Output: 12V 5A Adapter

Working Temperature 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperature -20°C ~85°C (-4°F ~ 185°F)
Working Humidity 20% ~ 80%
Storage Humidity 5% ~ 95%
Product Dimensions 4.65 in. x 5.91 in. x 1 in.
Weight (lbs) 1.5 lbs.
Certifications FCC, CE, REACH
Compliance NIST SP 800-88r1, ISO 27000

Title

USB3.1 Carry Flash Duplicator & Tester
(USB/USB-HDD)
User Manual vA.03
Download Here